Part 8, Chapter 20: Manual Exhibit 8-20-H
Telecommunications Product: _ ____________________________________________________
Manufacturer/Contractor/Vendor: ____________________________________________________
Tester Name: ______________________________________ Phone: (___) ___________________
Tester Signature: ___________________________________ Date: _______________________
Fully Compliant (FC): All instances fully meet the standard as defined below
Non-Compliant (NC): All instances did not meet the standard
Partially Compliant (PC): Partially met and requires further explanation
Not Applicable (N/A): Standard is not applicable to this application
Not Tested (NT): Standard was not tested
Compliance is defined as meeting the requirement set forth in the Section 508 Technical Standards 36 CFR Part 1194 .
Any item not rated as fully compliant needs an explanation in detail as to why the standard was not met. Enter the ID number and an explanation in the space provided at the end of the checklist.
Checklist Questions |
||||||
|---|---|---|---|---|---|---|
| 1 |
Vision
(a) All mechanically operated controls and keys shall comply with 1194.23 (k) (1) through (4). (a.1) Controls and keys shall be tactilely discernible without activating the controls or keys. Are all mechanically operated controls and keys tactilely discernible without activating the controls or keys? |
|||||
|
(a.2) Controls and keys shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls and keys shall be 5 lbs. (22.2 N) maximum.
(a.2.i) Are all mechanically operated controls and keys operable with one hand and do not require tight grasping, pinching, or twisting of the wrist? |
||||||
| (a.2.II) Is the force required to activate controls and keys 5 lbs. (22.2 N) maximum? | ||||||
|
(a.3) If key repeat is supported, the delay before repeat shall be adjustable to at least 2 seconds. Key repeat rate shall be adjustable to 2 seconds per character.
(a.3.i) If key repeat is supported, is the delay before repeat adjustable to at least 2 seconds? |
||||||
|
(a.3.ii) If key repeat is supported, is the repeat rate adjustable to 2 seconds per character? |
||||||
|
(a.4) The status of all locking or toggle controls or keys shall be visually discernible, and discernible either through touch or sound.
Is the status of all locking or toggle controls or keys visually discernible, and discernible either through touch or sound? |
||||||
| 2 |
Touch screens
(b) If a product utilized touch screens or touch-operated controls, an input method shall be provided that complies with 1194.23 (k) (1) through (4). (b.1) Controls and keys shall be tactilely discernible without activating the controls or keys. If the product uses touch screens or touch-operated controls are all mechanically operated controls and keys tactilely discernible without activating the controls or keys? |
|||||
|
(b.2) Controls and keys shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls and keys shall be 5 lbs. (22.2 N) maximum.
(b.2.i) If the product uses touch screens or touch-operated controls are all mechanically operated controls and keys operable with one hand and do not require tight grasping, pinching, or twisting of the wrist? |
||||||
|
(b.2.ii) If the product uses touch screens or touch-operated controls is the force required to activate controls and keys 5 lbs. (22.2 N) maximum? |
||||||
|
(b.3) If key repeat is supported, the delay before repeat shall be adjustable to at least 2 seconds. Key repeat rate shall be adjustable to 2 seconds per character.
b.3.i) If the product uses touch screens or touch-operated controls, and key-repeat is supported, is the delay before repeat adjustable to at least 2 seconds? |
||||||
|
(b.3.ii) If the product uses touch screens or touch-operated controls, and key-repeat is supported, is the repeat rate adjustable to 2 seconds per character? |
||||||
|
(b.4) The status of all locking or toggle controls or keys shall be visually discernible, and discernible either through touch or sound.
If the product uses touch screens or touch-operated controls, is the status of all locking or toggle controls or keys visually discernible, and discernible either through touch or sound? |
||||||
| 3 |
Biometric identification
(c) When biometric forms of user identification or control are used, an alternative form of identification or activation, which does not require the user to possess particular biological characteristics, shall also be provided. If biometric forms of user identification or control are used, is there an alternative form of identification or activation, which does not require the user to possess particular biological characteristics? |
|||||
| 4 |
Expansion joints
(d) Where provided, at least one of each type of expansion slots, ports and connectors shall comply with publicly available industry standards. If provided, is at least one of each type of expansion slots, ports and connectors compliant with publicly available industry standards? |
Enter the ID number and a detailed explanation for any Non-Compliant (NC), Partially Compliant (PC), Not Applicable (N/A), or Not Tested (NT) results from above.
Application Results:
___Fully Compliant ___Partially Compliant ___Non-Compliant ___ Not Applicable ___ Not Tested
Checklists will be superseded by forthcoming HHS guidance on acceptance criteria. See the latest materials .
Additional Comments:
